Pullman Holt GB1400E Manual de usuario descargar pdf (Pagina 12)

AFTER THE WORK IS TERMINATED

6 . Move the machine to the place provided for draining the water

7. Detach the tubes and remove the recovery tank

8. Empty the recovery tank by removing the caps and tilting it

9. Disassemble the brush and clean it with a jet of water (to disassemble the brush, see

“DISASSEMBLING THE BRUSH”

ATTENTION: Always wear gloves when doing this operation

to protect yourself from contact with hazardous solutions.

Procee

d as follows at the end of the work cycle and before you

perform any type of maintenance.

1. Turn off the solenoid valve switch (3)

2. Raise the squeegee by mean of the rear handle (4)

3. Turn off the suction switch (2)

4. Turn off the main switch (1)

5. Disconnect the power cable from the socket

page 15)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Pullman Holt GB1400E Manual de usuario Pagina 12