Pullman Holt GB1400E Manual de usuario descargar pdf (Pagina 10)

OPERATION

1. PREPARING TO WORK

The following procedures must be done before installing the tanks:

1. Check the switches are in the off (“0”) position

2. Connect the cable to the socket

3. Prepare the machine for operation

4. Lower the squeegee command lever in order to start working

5. Press the main switch (1) and check that the green indicator light comes on

6. Press the suction switch (2) and check that the green indicator light comes on

7. Press the solenoid valve switch (3) and check that the green indicator light comes

on. At this point, the machine can work efficiently using the operating lever that

operates the brushes (4), until the detergent solution is finished.

2. OVERFLOW DEVICE

The machine is fitted with a float filter which intervenes when the recovery tank is full,

causing the suction tube to close.

In this case, it is necessary to switch off the machine and empty the recovery tank.

ATTENTION: Always wear gloves when doing this operation to

protect yourself from contact with hazardous solutions.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Pullman Holt GB1400E Manual de usuario Pagina 10